Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
thermoform mold design sites
- Thread starter garyreif
- Start date
That’s a tough one. It seems the place where innovative design really happens is at our molders. They how what they like, what works for their materials, equipment, etc. I’ve found from our work proofing ideas here and design development with the molders, allow us to take design way beyond the textbook and web-base stuff I’ve seen.
Fell free to drop me a note if you have specific questions. Happy to help.
Mike Milano
D8, Inc.
mike_milano@d8.com
Fell free to drop me a note if you have specific questions. Happy to help.
Mike Milano
D8, Inc.
mike_milano@d8.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question