Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

thermo forming or vacuum forming laminated plastic

Status
Not open for further replies.

pardal

Automotive
Oct 17, 2001
444
AR

Hi all polymer people.

I'm on my first step designing a piece by thermo and or vacuum forming.

I need to make a cabinet or pan about 450 mm length 300 mm wide 120 mm deep , with 20 mm flange all arround .

My main concern is about minumun fillet radious and angle scape.

It will be made with High impact Polietylene 1 to 1.5 mm thick.










Pardal
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top