The specification states that hot applied thermo-plastic materials shall be of such rthickness to uniformly coat the equivalent of 14mm single surface dressin g and having a minimum thickness of 3mm.But the manufacturer says that the road marking paint of 3mm thickeness is too thick.Please assist of this issue prior advising the Contractor.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
The manufacture of road painting.
- Thread starter msesi
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question
