mechengineer
Mechanical
If the governing MAWP for whole preaaure vessel in Compresse claculation report has been used in the design of nozzle loads (WRC 107 or 297) and support system (skirt or saddle supp.)?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
The governing MAWP to be used in support system and nozzle loads design as well
- Thread starter mechengineer
- Start date
- Status
Similar threads
- Question