Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tack weld nut vs headed bolt 1

Status
Not open for further replies.
delagina

delagina

Structural
Joined
Sep 18, 2010
Messages
1,008
Location
US
Does this affect anchor bolt embedment.. looking at my spreadsheet and there're nothing there if it's tack weld nut on threaded rod as opposed to headed bolt
 
Sort by date Sort by votes
HR10... OK, I don't use them... If the rod rotated then it would quickly 'bottom out' on the concrete. Still not going anywhere...

Dik
 
Upvote 0 Downvote
"If the rod rotated then it would quickly 'bottom out' on the concrete."

Unless it rotates the other direction, which would typically be the concern, as it would loosen the anchorage.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Question Question
Pin in Shear vs Bolt in Shear - why the difference?
Replies
2
Views
8K
mfgenggear
mfgenggear
LS_SMS
  • Locked
  • Question Question
Weld Sizing - Blodgett vs. FEA
2
Replies
33
Views
9K
Eng16080
Eng16080
dik
  • Locked
  • Question Question
HAZ for welding headed stud to plate
Replies
6
Views
3K
dik
dik
MikeB8993
  • Locked
  • Question Question
Bolt and Nut Specification Issue
Replies
6
Views
441
rb1957
rb1957
tmgczb
  • Question Question
Bolt Thread
Replies
4
Views
656
dik
dik

Part and Inventory Search

Sponsor

Back
Top