Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SURFACE RESISTANCE OF AIR TABLE 3.3

Status
Not open for further replies.

antony09

Mechanical
Joined
Feb 17, 2003
Messages
26
Location
PA
WE HAVE A STEEL ROOF WITHOUT INSULATION, WE NEED TO DECREASE THE HEAT LOAD TO THE ROOM, WE CAN NOT INSTALL INSULATION BELOW ROOF, WE THINK THAT THE HEAT TRANSFER WILL DECREASE WITH THE USE OF ALUMINUM FOIL ABOVE STEEL ROOF. WE VERIFY THE TABLE 3.3 "SURFACE RESISTANCE OF AIR" WE HAVE A STEEL ROOF WITH EMITTANCE OF 0.25 AND R=2.7 (HORIZONTAL SURFACE WITH DOWNFLOW HEAT FLOW). WHEN WE USE ALUMINUM FOIL THE EMITANCE IS 0.05 AND THE RESISTANCE IS 4.55. THE USE OF THIS ALUMINUM FOIL HELP TO DECREASE THE HEAT FLOW 30%. IT IS CORRECT?
 
PLEASE ANYBODY CAN EXPLAIN IT.
 
Hi Antony09 , maybe it is true or not , but a aluminiun foil over a roof will not last so shining as new.
So all the benefits will be lost.

Here we use some white paint specially done for it's purpouse.




Pardal
 
thank a lot pardal. it will be fully apreciated.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top