Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Supersonic Test 1

Status
Not open for further replies.

sg20

Mechanical
Joined
Mar 8, 2005
Messages
117
Location
US
Does anyone know of a lab facility that can do supersonic test for a reasonable fee? Your help would be appreciated.

Phil
 
Sustained or just for a short time delta?

Many universities will do this kind of work using their labs.

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
any local university (worth their salt) should have a wind tunnel.

The fee could be very nominal if you present it as a thesis project (for an undergrad), but then the results would be on the public record (if that mattered).
 
Local to where? Cornell Aeronautical Lab (CALSPAN) is in Buffalo.
 
I believe you can hire military/gov facilities.

When I was at Pax River all of the test facilities were cost centers looking for paying customers inside or outside the military.

Having said that, I don't believe I ever saw wind tunnel facilities, but that wasn't the type of project I was involved with.

In theory, there is no difference between theory and practice; experience suggests that in practice, there is.
 
I contacted couple of universities and most were occupied with other research works and they must also have other staff member approvals before taking on the work... I'm still waiting for their replies.
 
This PDF might be helpful; it was done in 2008 and seems to be a survey of wind tunnels, their capabilities, and contact information in the Western Hemisphere.


Good luck.

When the future's architectured
By a carnival of idiots on show
You'd better lie low
 
Jetgirl8, that was the most complete list of all test facilities, thanks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top