glassmaker
Automotive
Does anyone know where I can find stress strain curves for aluminum alloys, particularly 6005-T5?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stress Strain curves
- Thread starter glassmaker
- Start date
- Status
SWComposites
Aerospace
Mil-Handbook-5/MMPDS-01/MMPDS-02. See various posts in the Aircraft Engineering forum for sources.
- Thread starter
- #4
glassmaker
Automotive
NO 6005???
MatWeb Data Sheet
Aluminum 6005-T5 Date: 11/15/2006 1:15:02 PM
KeyWords:
UNS A96005; ISO AlSiMg; Aluminium 6005-T5; AA6005-T5
"SubCat: Aluminum Alloy, Nonferrous Metal, 6000 Series Aluminum Alloy, Metal"
Material Notes:
"Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN."
Component Value Min Max
"Aluminum, Al" 97.5 99
"Chromium, Cr" 0.1
"Copper, Cu" 0.1
"Iron, Fe" 0.35
"Magnesium, Mg" 0.4 0.6
"Manganese, Mn" 0.1
0.05
MatWeb Data Sheet
Aluminum 6005-T5 Date: 11/15/2006 1:15:02 PM
KeyWords:
UNS A96005; ISO AlSiMg; Aluminium 6005-T5; AA6005-T5
"SubCat: Aluminum Alloy, Nonferrous Metal, 6000 Series Aluminum Alloy, Metal"
Material Notes:
"Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN."
Component Value Min Max
"Aluminum, Al" 97.5 99
"Chromium, Cr" 0.1
"Copper, Cu" 0.1
"Iron, Fe" 0.35
"Magnesium, Mg" 0.4 0.6
"Manganese, Mn" 0.1
0.05
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question