Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Streamlines in a focused region of a large part

Status
Not open for further replies.
Earendall

Earendall

Mechanical
Joined
Apr 28, 2006
Messages
6
Location
US
Hey Guys,
I am working on a large fan housing and i'm wanting to put streamlines in a specific region of the part. I have tried using a plane and this did not work. Can anyone guide me in how to do this?
I am still new to Ansys.

Thanks
 
Status
Not open for further replies.

Similar threads

O
  • Question Question
Simulation of a screw connexion
Replies
1
Views
4K
dgeesaman
dgeesaman
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
794
Rabea-19
R
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W

Part and Inventory Search

Sponsor

Back
Top