Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stellite Alloy in Amine environment 1

Status
Not open for further replies.
GadflyHu

GadflyHu

Materials
Joined
Sep 3, 2014
Messages
3
Location
CA
Hi @Steamdog, As you mentioned in thread408-255437, your working partner suggested that Stellite alloy should not be applied in Amine environment. Did he/she mentioned the failure situation or the reason. Thanks!
 
Sort by date Sort by votes
Thank you very much in advance for any information:)
 
Upvote 0 Downvote
Anyone with information is welcomed. Thanks!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Ratheesh_n
  • Locked
  • Question Question
Stellite 6 over Alloy 625 weld overlay
Replies
1
Views
1K
SPDL310
SPDL310
Material Engineer 98
  • Locked
  • Question Question
Stellite-6 requirement on Solid Inconel 825 Trim material
Replies
1
Views
623
Danlap
Danlap
EngTal
  • Question Question
Gland becomes brittle and porous in High Pressure NH3 service
Replies
1
Views
6K
Danlap
Danlap
T
  • Locked
  • Question Question
Flowrate in a valve
Replies
4
Views
3K
Snickster
Snickster
yldrmkara
  • Locked
  • Question Question
Dimension standard problem in valve bonnet gasket
Replies
1
Views
2K
reverman
reverman

Part and Inventory Search

Sponsor

Back
Top