Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Steam line pipe specification
- Thread starter amanites
- Start date
- Thread starter
- #4
GregLamberson
Petroleum
amanites
Be sure and check with B31.3 (most commonly used for steam lines) or B31.1 when looking at your overall system components & design.
You may want to look at ASME SEC I, Figure 100.1.2, A & B (in B31.1)
There have been some good threads on steam lines/systems, a search will turn them up.
Greg Lamberson, BS, MBA
Consultant - Upstream Energy
Website:
Be sure and check with B31.3 (most commonly used for steam lines) or B31.1 when looking at your overall system components & design.
You may want to look at ASME SEC I, Figure 100.1.2, A & B (in B31.1)
There have been some good threads on steam lines/systems, a search will turn them up.
Greg Lamberson, BS, MBA
Consultant - Upstream Energy
Website:
- Status
Similar threads
- Locked
- Question
- Locked
- Question