Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Standards related to "Brazing and Soldering filler metals"
- Thread starter xray1366
- Start date
+1 for AWS
In actual practice the standards are much tighter than that. We use AWS alloys that are rated + / - 1%. They are actually measured in ppb(parts pre billion) for purity.
A 2% difference in the chemistry can make a significant difference in the performance in automated, precision brazing equipment.
Thomas J. Walz
Carbide Processors, Inc.
Good engineering starts with a Grainger Catalog.
In actual practice the standards are much tighter than that. We use AWS alloys that are rated + / - 1%. They are actually measured in ppb(parts pre billion) for purity.
A 2% difference in the chemistry can make a significant difference in the performance in automated, precision brazing equipment.
Thomas J. Walz
Carbide Processors, Inc.
Good engineering starts with a Grainger Catalog.
- Status
Similar threads
- Question
- Locked
- Question
- Question
- Locked
- Question
