Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Standards/Certification

Status
Not open for further replies.
azasueng

azasueng

Mechanical
Joined
Jan 21, 2011
Messages
1
Location
US
I'm looking at starting an company building automated production equipment and was wondering if there was any sort of standards, codes, or certifications I need to obtain in order to build this type of machinery.

Thanks.
 
Status
Not open for further replies.

Similar threads

Gerry02
  • Locked
Mass/CoG - Drawing standards
Replies
2
Views
1K
CWB1
CWB1
nvcadadmin
  • Locked
  • Question Question
Single Source Options for Standards Organizations
Replies
0
Views
723
nvcadadmin
nvcadadmin
DArmst264
  • Locked
  • Question Question
Withdrawn Historic British Standards - CP3 (Roof imposed loads)
Replies
2
Views
1K
The Obturator
The Obturator
spray_arc
  • Locked
  • Question Question
Using UNS system to comply for American and EU Standards welding qualifications
Replies
0
Views
749
spray_arc
spray_arc
Sam0660
  • Locked
  • Question Question
Reference to "code latest edition" in engineering standards
Replies
6
Views
788
RRaghunath
RRaghunath

Part and Inventory Search

Sponsor

Back
Top