Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mass/CoG - Drawing standards

Status
Not open for further replies.
Gerry02

Gerry02

Mechanical
Joined
Jun 21, 2024
Messages
3
Location
CA
Are there any standards in North America that detail when to add Mass/Centre of Gravity to engineering drawings
 
It's standard to do so when it's necessary, useful information for the drawing's intended audience.
 
I dont recall ever seeing either an internal or external standard requiring it. IME CG is typically only used on component sales and vehicle/machine level prints.
 
Status
Not open for further replies.

Similar threads

nvcadadmin
  • Locked
  • Question Question
Single Source Options for Standards Organizations
Replies
0
Views
723
nvcadadmin
nvcadadmin
DArmst264
  • Locked
  • Question Question
Withdrawn Historic British Standards - CP3 (Roof imposed loads)
Replies
2
Views
1K
The Obturator
The Obturator
spray_arc
  • Locked
  • Question Question
Using UNS system to comply for American and EU Standards welding qualifications
Replies
0
Views
750
spray_arc
spray_arc
Sam0660
  • Locked
  • Question Question
Reference to "code latest edition" in engineering standards
Replies
6
Views
793
RRaghunath
RRaghunath
HungryDinosaur_imported
  • Locked
  • Question Question
Line colour code/standard for dimensions, text and equipment on .dwg drawings
Replies
3
Views
4K
BrianPetersen
BrianPetersen

Part and Inventory Search

Sponsor

Back
Top