Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Ron247 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Single Source Options for Standards Organizations

Status
Not open for further replies.
nvcadadmin

nvcadadmin

Mechanical
May 9, 2024
1
Are there other companies similar to IHS Markit (now Accuris) that provide access to all standards, other than purchasing them through their individual organizations?
 
Status
Not open for further replies.

Similar threads

Gerry02
  • Locked
Mass/CoG - Drawing standards
Replies
2
Views
1K
CWB1
CWB1
spray_arc
  • Locked
  • Question
Using UNS system to comply for American and EU Standards welding qualifications
Replies
0
Views
722
spray_arc
spray_arc
mgokyurek
CE Marking for Piping
Replies
0
Views
4K
mgokyurek
mgokyurek
DArmst264
  • Locked
  • Question
Withdrawn Historic British Standards - CP3 (Roof imposed loads)
Replies
2
Views
1K
The Obturator
The Obturator
Ahmed Elarbagi
  • Question
FG Pressure limit inside buildings for oil & gas facilities
Replies
0
Views
3K
Ahmed Elarbagi
Ahmed Elarbagi

Part and Inventory Search

Sponsor

Back
Top Bottom