I needed to create a FEM of a vertical pipe and an inclined pipe joint in STAAD. Inclined pipe is connected to the vertical pipe at 33 deg. I was able to create vertical pile FEM using 3D circular repeat command. However, I am not sure how to do the same for inclined pipe since axis of rotation of the pipe is not parallel to any of the global axes. A tutorial of K or Y connection FEM in staad would help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
STAAD FEM of pipe connection
- Thread starter Janak599
- Start date
Similar threads
- Question