Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Spigot and socket joints in ASME B31.3?

Status
Not open for further replies.
Jaypeet

Jaypeet

Nuclear
Joined
Jul 30, 2003
Messages
2
Location
GB
We have located a number of spigot and socket joints on a 60+ year old 300NS steam line. Anyone know if we can possibly qualify this type of joint against B31.3? Any help on the limitations of this joint type would be a good start!
 
Status
Not open for further replies.

Similar threads

Drilling Integrity Super.
  • Locked
Differences in Minimum Allowable Stresses in ASME B31.3 for Low and High Pressure
Replies
3
Views
3K
GD2
GD2
JARivera1
  • Locked
  • Question Question
ASME B31.3-2016 PWHT Exemption
Replies
6
Views
6K
JARivera1
JARivera1
S.G
  • Locked
  • Question Question
Category M (ASME B31.3)
Replies
2
Views
2K
S.G
S.G
gkvengat
  • Question Question
Socket flange , scoket depth tolerance
Replies
5
Views
4K
David3399
D
T
  • Locked
  • Question Question
ASME B31.3 | Titanium Values of Coefficient Y | Table 304.1.1
Replies
1
Views
1K
GD2
GD2

Part and Inventory Search

Sponsor

Back
Top