Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Spheroidize of 1144?

Status
Not open for further replies.
johnbe

johnbe

Mechanical
Joined
Mar 23, 2005
Messages
1
Location
US

Is it possible to spheroidize 1144 alloy steel?



 
Sort by date Sort by votes
Yes, 1144 can be spheroidized. But, if you are hoping that this will increase some formabililty parameter, you may be out of luck, as the sulfur inclusions will then be the limiting factor for formability.
 
Upvote 0 Downvote
As swall said, 1144 steel can be spheroidize annealed.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Dhineshkumar mani
  • Locked
  • Question Question
welding of hardox 400
Replies
4
Views
1K
U Egenhofer
U Egenhofer
Lee.k
  • Locked
  • Question Question
Galvanic corrosion of 316
Replies
3
Views
1K
EdStainless
EdStainless
lilebin
  • Locked
  • Question Question
Can anyone make this kind of alloy manhole cover?
Replies
6
Views
1K
SnTMan
SnTMan
Lee.k
  • Locked
  • Question Question
Galvanic Corrosion of 316 Thread
Replies
5
Views
1K
EdStainless
EdStainless
Salmet
  • Locked
  • Question Question
Internal Pickling and Passivation of Super duplex stainless steel SA 790 UNS 32750
Replies
3
Views
1K
SJones
SJones

Part and Inventory Search

Sponsor

Back
Top