Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Soil Temperature for Buried Pipeline Fluid thermal analysis

Status
Not open for further replies.

Hariharan

Marine/Ocean
Joined
Oct 26, 2000
Messages
80
Location
IN
It is well known that buried pipelines get an insulating effect from adjacent soil mass.
Can anyone cite references where the temperature of the soil just below seabed
has been measured and reported? This could also have been used in the analysis
of temperature gradient of the fluid in the pipeline.

Thanks

Hariharan
 
Hari,
The soil temperature at seabed or just below seabed should be same as the seawater temperature at seabed, what you should probabaly look for is the thermal conductivity of the soil at seabed which in my opinion is dependent on the soil type and porosity.
Rgds
Naren
Narendranath R
Pipeline engineering is made easy with state of the art computer software, visit
 
Try the websites of Logstor etc who makes preinsulated (PUR)pipe for marine applications. They will have data or you can contact them direct.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top