Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

sodiumhypochlorite 15% and PVC-C 1

Status
Not open for further replies.
starch

starch

Chemical
Joined
Feb 7, 2003
Messages
1
Location
NL
who has experience with sodiumhypochlorite 15% and the use of PVC-C as piping material? Temp 25-35C. 2 pressure ranges: 1-2 bar and 3-5 bar? Lifetime? better material?
 
Sort by date Sort by votes
We use Schedule 80 PVC but have learned use of proper solvent cement formulated for improved chemical resistance to hypochlorite solutions and careful joint preparation per manufacturers directions will prevent leaks.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MechEng Dan
  • Locked
  • Question Question
Mech Seal Coolers - ASME B&PVC Sect VIII, Y or N
Replies
1
Views
296
Heaviside1925
Heaviside1925
T
  • Locked
  • Question Question
pump and motor
2 3 4
Replies
60
Views
17K
Hartley Kingon
Hartley Kingon
S
  • Question Question
Two Pumps of Different Product and Ratings Pumping into a Common Header
Replies
12
Views
15K
LittleInch
LittleInch
D
  • Question Question
Q. Regarding Allowable Nozzle Loads and Moments in HI 9.6.2 vs. API 610
Replies
2
Views
7K
RVAmeche
RVAmeche
T
  • Locked
  • Question Question
Improving a Closed Loop Cooling System – Flow Regulation between 1L/min and 10L/min
Replies
10
Views
3K
thomx5
T

Part and Inventory Search

Sponsor

Back
Top