Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Snapping in geopak

Status
Not open for further replies.
AJgeo

AJgeo

Geotechnical
Joined
Oct 11, 2004
Messages
10
Location
US
Hello-

I am drawing cross section cut slopes in geopak (Microstation V8)using the draw XS line tool and I cannot seem to get snapping to work. Has anyone else had this happen and know a way to get snapping to work in geopak? Thanks.

-AJgeo
 
Sort by date Sort by votes
Have you checked you design settings and attributes? Start there and see. You can also use your normal line and make it snap. Some of the tools in GEOPAK have the same properties as the Tools on the Main Palette try those as well.
Regards,
Namdac
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

darcy1942
  • Locked
  • Question Question
Using the middle mouse button to pan/drag and tentative snap + left click in one step
Replies
1
Views
2K
udraft
udraft
davidinindy
  • Locked
  • Question Question
Saving a Solidworks file into a .DGN file without any Bently / Microstation software?
Replies
1
Views
836
JG2828
JG2828
aatbinc
  • Locked
  • Question Question
Forgot password in Geopak
Replies
1
Views
268
mechamb
mechamb
CWEngineer
  • Locked
  • Question Question
Scale for Cells in Microstation V8i vs J
Replies
0
Views
638
CWEngineer
CWEngineer
Sn00ze
  • Locked
  • Question Question
DWG block attributes into DGN
Replies
0
Views
551
Sn00ze
Sn00ze

Part and Inventory Search

Sponsor

Back
Top