Single Line on Piping

[jafary64]

Hi, my friends,

I would like to ask about the single-line documentation on piping.

• Is this document required for piping design?
• What is the purpose of this document?
• Which discipline(s)—piping, process, or others—are responsible for issuing and revising it?

Thanks a lot.

 

[LittleInch]

Eh?

You're going to need to describe what a "single-line documentation on piping" actually is. An example might help as well.

SO I would start with "What is this document?" And who is asking for it?

Only then can I work out what you mean, but maybe someone else knows what it is you're asking?

 

[HTURKAK]

- Isometric piping drawings are not scale drawings. Single line drawing is not a standard terminology and used for dimensioned drawings and
which shows the size and location of pipes, fittings, and valves. The pipes drawn with single line regardless of the diameter.

 

[LittleInch]

"Single line documentation" could be anything.

P&ID, PFD, schematic, Isometric, could even be a single line diagram - which is an electrical drawing.