Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shall we consider a profile tolerance with datum referenced at mmc as additional tol in stackup anal

Status
Not open for further replies.
Babu96

Babu96

Mechanical
Joined
Dec 10, 2019
Messages
8
Location
IN
Shall we consider a profile tolerance with datum referenced at mmc as additional tol in stackup analysis
 
Sort by date Sort by votes
The order is critical to understanding MMB/LMB of the datum feature simulators. Changing the order can make drastic changes to the MMB/LMB limits. That's what makes that example a particularly bad one.
 
Upvote 0 Downvote
Again, I don't disagree with that.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

edw.jack23
  • Locked
  • Question Question
General Profile Tolerance Interpretation
Replies
15
Views
4K
3DDave
3DDave
Diametrix
  • Question Question
Hex hole as a datum feature
2
Replies
21
Views
22K
Burunduk
Burunduk
supergee
  • Solved
composite tolerance at lmc : is it nonsense?
Replies
13
Views
1K
Burunduk
Burunduk
F
  • Question Question
Profile tolerance unless otherwise specified - WRT Datums vs no datums
2
Replies
32
Views
9K
Burunduk
Burunduk
D
  • Locked
  • Question Question
Interpretation of General Profile Tolerance Note
Replies
15
Views
6K
Burunduk
Burunduk

Part and Inventory Search

Sponsor

Back
Top