Shading not correct for all surface parts in NX7.5.5.4 1

[PSI-CAD]

Hi,

I have a strange behavior with a Workstation DELL with quadro 2000

The shading is correct with solid body but only some faces are shaded with surface model. And If I turn the model, the shading is reversed (have a look at back_view.jpg and front_view.jpg)

Preferences / Visualization / Visual / two sided light ON doesn't solve the problem

If I set a small transluency on all faces (1%) the shading is almost correct

Thanks in advance for your suggestion




Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[cowski]

Preferences -> Visualization performance -> general graphics
Turn off the "backface culling" option.

www.nxjournaling.com

 

[PSI-CAD]

Thanks Cowski,

I had forgotten this setting. I will try tomorrow and let you informed


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[PSI-CAD]

Hi Cowski,

finally I could test it now. thank you again


Regards
Didier Psaltopoulos

http://www.psi-cad.com