Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

separation of ether and ethanol/water

Status
Not open for further replies.
dude19

dude19

Chemical
Joined
Sep 5, 2008
Messages
3
Location
GB
Ternary mixture of 60% ether, 32% ethanol, 8% water by volume. Want to calculate the theoretical stages required to reach the azeotropic mixture of 98.9% ether 1.1% water out the top of the column. Macabe is only for binary mixtures right? How many stages do I need
 
Status
Not open for further replies.

Similar threads

engr2GW
  • Question Question
3 phase separator, oil bucket front and water weir at the same height
Replies
3
Views
736
LittleInch
LittleInch
adrich91
  • Question Question
NPSH and maximum vaccum of the pump
2
Replies
20
Views
17K
adrich91
adrich91
wbic1
  • Question Question
What is the P&ID symbol of a double block and bleed valve (DBB) (Not two independent valves and a bleed valve) ?
Replies
5
Views
3K
georgeverghese
georgeverghese
Atari20
  • Locked
  • Question Question
CO2 filter in the vent opening of a Demineralized water storage tank
Replies
4
Views
1K
LittleInch
LittleInch
seagal3232
  • Question Question
Steam Flow And Heating Time In Batch Reactor
Replies
4
Views
4K
pierreick
pierreick

Part and Inventory Search

Sponsor

Back
Top