Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Selection of MCCB Protection for Inrush current of 11 kv/0.433 kV, 1000 KVA Transformer

Status
Not open for further replies.
Dhruv B Patel

Dhruv B Patel

Electrical
Joined
Dec 19, 2022
Messages
4
Location
AU
Is the inrush current value doubled or changed marginally, while two transformers (Step up and step down) are connected in series? How do select MCCB Protection for the Inrush current of two 11 kV/0.433 kV and 0.433 kV/11 kV 1000 KVA Transformers?
 
Status
Not open for further replies.

Similar threads

J
  • Question Question
Directly from 30 kV to 0.4 kV? Or step down the voltage in stages, typically from 30 kV to 6 kV, then from 6 kV to 0.4 kV.
Replies
12
Views
18K
electricuwe
electricuwe
HenryOhm
  • Question Question
Probability Distribution of Transformer Inrush
Replies
5
Views
982
waross
waross
R
Zigzag earthig transformer+ NGR on the secondary side of a 132/33 kV Yd transformer.
Replies
9
Views
869
Robert2025
R
G
  • Question Question
Generator Protection - Selection of Fuse based on Sustained Current
Replies
9
Views
7K
wcaseyharman
wcaseyharman
gorky
  • Locked
  • Question Question
110/33 kV transformer and REFCL for metro line
Replies
3
Views
3K
7anoter4
7anoter4

Part and Inventory Search

Sponsor

Back
Top