Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sec VIII Div. 1 / Current Eddition / Addenda? R-1 Form

Status
Not open for further replies.

RefineryQC

Petroleum
Joined
Jun 30, 2011
Messages
5
Location
US
My question involves the R-1 Form...

By the Original Code of Construction they ask for the edition/addenda in which it was built under.

Example, lets say... The vessel I'm working on was built in 1970...
How would I know what the Sec VIII current edition/addenda was at that time?

If I don't know the answer to that question do I just put the year it was built under and that would be efficient enough?

Thanks for your time
 
You can use the current, 2010 Edition, if you wish.

 
RefineryQC - Do the best homework you can to find the U1-A for the vessel which will tell you what the Code edition/addenda the vessel was built to, then you can copy that information over to the R-1.

If you aren't able to obtain the U1-A then use the nameplate information and just put the year. If you don't have a nameplate then you need to check with your jurisdiction to see if the vessel is legal to repair at all (in california...it would be dead).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top