Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Save deflected geometry in CAD

Thread starter seekinganswers
Start date Nov 9, 2005

Status: Not open for further replies.

Nov 9, 2005

seekinganswers

Aerospace

Hi all,

I want to save the deflected shape of a mirror calculated in Mechanica to be used in later optical analysis. I can not use tessellated surfaces or the mesh geometry. I need very high accuracy. I want to "update" the CAD model geometry (UG or Pro/E) with the exact deflected shape. PTC did not want to reveal their shape functions by allowing this. Does anyone know how this could be done?