Rotational analysis of a flywheel

[Spunk240]

I am trying to determine stresses imposed on a flywheel rotating at 4000 rpm. I have tried mulitiple ways to constrain the part, but I am having no luck. I am applying the rotation as a centrifugal load (converted to rad/sec). I have done a hand calculation of the Burst speed, and found that my design would work with a 10x safety factor, but I would like to be able to analyze it as well. It should be pretty straight forward except for the constraints.

 

[Israr]

Apply the well-known 3-point contraint technique.


For help check tutorials at:


www.caddigest.com


Israr

 

[Spunk240]

I can't find the proper tutorial. Is it under the Pro-E section, or is it somewhere else?


Thanks

 

[Israr]

yes it is under ProE section.


Israr