Reflective paint for vision system use

[uncalled4]

I use an OGP Avant Zip vision system to measure small metal stampings. When measuring some parts held in a metal fixture or clamp, I cannot see the edge I am trying to measure very well. I need to put some reflective paint under that edge(paint on the fixture beneath the part edge)to give more contrast, making it easy to see. Do you have any ideas for a type of paint that would be best for this? Thank you.

 

[MikeHalloran]

Not seeing the edge of a metal stamping agains a metal fixture suggests that you need a _non_reflective paint.

http://www.kpg-industrial.com/products/nonreflective_camouflage_bulk_paint/

Or, if you really do want reflective paint, try this:

http://www.kpg-industrial.com/products/reflectalite_spray_paint

Mike Halloran
Pembroke Pines, FL, USA

 

[uncalled4]

Thanks for the suggestions. I'll do some experimenting.