Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reaction force of tool

Status
Not open for further replies.
Vxxxxx

Vxxxxx

Mechanical
Joined
Jun 5, 2020
Messages
91
Location
MY
qqq_js1zc8.png


Hi, just wanted to make sure that from field output request, RF1 refers to the reaction force on X-axis, and RF2 refers to the reaction force on Y-axis. Correct?

Thank you.
 
Sort by date Sort by votes
Yes, X, Y and Z axes correspond to 1, 2 and 3 numbers.
 
Upvote 0 Downvote
Okay, thank you very much FEA way
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

F
  • Question Question
Purpose of Reaction Force in ABAQUS
Replies
2
Views
2K
FEA way
FEA way
A
  • Locked
  • Question Question
Unstable Reaction Force and Unrealistic Elastic Modulus in Abaqus HPC Simulation
Replies
1
Views
2K
FEA way
FEA way
M
  • Locked
  • Question Question
Impact force
Replies
3
Views
3K
FEA way
FEA way
N
  • Locked
  • Question Question
Force vs displ
Replies
17
Views
3K
FEA way
FEA way
B
  • Locked
  • Question Question
Concentrated Force on a Rigid body reference point
Replies
2
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran

Part and Inventory Search

Sponsor

Back
Top