Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Radial text?
- Thread starter roc61
- Start date
ProDraftsman
Civil/Environmental
I'm not too familiar with 2004 anymore. However, I'm pretty sure if you use the command 'arctext' you should get the desired result. You will have to draw an arc first.
Yes,
but you need the Express Tools.
Lothar
ADT 2004
but you need the Express Tools.
Lothar
ADT 2004
- Status
