Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Text Returns to XY Plane on Insert

  • Thread starter Thread starter timscholman
  • Start date Start date
T

timscholman

Guest
I have a wblock with a text atribute. When I created the drawing, and in the block editor, the text is rotated down from the XY plane by 45 degrees.
View attachment 1772

When I insert it, the text returns to the XY plane.
View attachment 1773
 

Attachments

  • Block Editor Image.jpg
    Block Editor Image.jpg
    54.3 KB · Views: 0
  • Inserted Block.jpg
    Inserted Block.jpg
    27.5 KB · Views: 0

Part and Inventory Search

Sponsor

Back
Top