Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PWHT REQUIREMENT 2

Status
Not open for further replies.
sathikn87

sathikn87

Mechanical
Joined
Oct 30, 2014
Messages
12
Location
SA
Hii there,
Which code in ASME sec viii governs the requirement of PWHT is mandatory or not?
Thanks
 
Sort by date Sort by votes
Read UW, UCS, UHA and any other sections that might pertain to your material.
 
Upvote 0 Downvote
Dear Jithin214

for your reference

Procedure PWHT ==> UW40
Procedure Local PWHT ===> UW40 and refer to WRC BULLETIN 452_JUNE-2000
Requirement PWHT for Carbon Steel ==> UCS 56
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Vessel-SA
  • Question Question
nozzle-head PWHT
Replies
14
Views
15K
Trestala
Trestala
AlbeBersani
  • Locked
  • Question Question
PWHT requirements for 304H prefabrication
Replies
6
Views
682
GD2
GD2
F
  • Question Question
RT requirement as per ASME B31.1
Replies
1
Views
1K
David3399
D
KD007
  • Question Question
SA-193 Gr.B7M bolt material used in Wet H2S service is not passing requirement of UG44b clause.
2
Replies
20
Views
10K
r6155
r6155
Ronak_Patel
  • Locked
  • Question Question
Impact Test Requirement for nozzle assembly as per UCS-66
Replies
4
Views
737
Ronak_Patel
Ronak_Patel

Part and Inventory Search

Sponsor

Back
Top