Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations Ron247 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with view dependant edit, to show desired hidden lines

Status
Not open for further replies.

peraage

Mechanical
Dec 18, 2013
2
Hi,
when using the approach to show desired hidden lines we have hit a problem.
When turning the hidden line font back to invisible, all lines disappear including the edited ones. Is there anyone else who has had this problem and knows a fix?
Is there any setting we might have changed to make it behave this way?
This worked fine for until a certain date.

We are running NX 8.5

Any help on this will be greatly appreciated.

Best regards
Per Åge
 
Replies continue below

Recommended for you

Have a look here:
thread561-395730

I'd guess that you are using the "exact" view type as opposed to the "pre-NX 8.5 exact" view type. The thread above may give you a work-around.

www.nxjournaling.com
 
Thanks cowski,

the effected views are "exact"

Best regards
Per Åge

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor