Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with exporting geometry from icem cfd

Status
Not open for further replies.
ansyiq

ansyiq

Mechanical
Joined
Jan 12, 2009
Messages
13
Location
US

I have got an .tin or tetin file which i need to export to parasolid file preferbly or iges but i couldnt do it. I am getting the following error

PK_ERROR _UNSUITABLE ENTITY 914
unknown pk_error 914 ( for parasolid)

/usr/local/apps/ansys11sp1_2/ansys_inc/v110/icemcfd/linux64_amd/dif/iges/igestotin_exec: symbol lookup error: /usr/local/apps/ansys11sp1_2/ansys_inc/v110/aisol/mw/lib-linux_optimized/libkernel32.so: undefined symbol: mainwin_init ( For iges)

What is the best way to carry it out?
 
Status
Not open for further replies.

Similar threads

Anurag K
  • Question Question
Hydrostatic bearing CFD analysis
Replies
1
Views
385
karachun
karachun
T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
andradesilva
  • Locked
  • Question Question
problems validating design optimized geometry in ANSYS workbench
Replies
0
Views
237
andradesilva
andradesilva
Avksent
  • Locked
  • Question Question
Solving the prestressing problem together with large deformations (ANSYS)
Replies
0
Views
234
Avksent
Avksent

Part and Inventory Search

Sponsor

Back
Top