Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro/Welding

Status
Not open for further replies.
CeJay

CeJay

Military
Joined
Jul 29, 2004
Messages
2
Location
GB
I really could do with any info that anybody has got regarding Pro/Welding.
Does anybody actually use it, what are the problems, do you have any training material/tutorials.

Thanks in anticipation CeJay
 
Sort by date Sort by votes
I used it, but I really didn't like the way it creates the welds. Especially in drawing mode.

If you have the licence, go ahead and and explore it. If you don't have the licence and you want to buy it, forget about it.

-Hora
 
Upvote 0 Downvote
Look at ProHelp docs or PTC's KB

Peter
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
2K
Designer_D
Designer_D
mattmyer
  • Locked
  • Question Question
Font Problems in Creo drawings
Replies
2
Views
2K
dgallup
dgallup
J
Pro-E Wildfire 4.0 Programming assistance needed !!
Replies
0
Views
3K
Joe Pie
J
samim09me
  • Locked
  • Question Question
Why this ProE Conflicts dialog box appears?
Replies
1
Views
400
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top