Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro Mold

  • Thread starter Thread starter biff
  • Start date Start date
Status
Not open for further replies.
B

biff

Guest
Is Pro Mold any good?

Are there any advantages in using it?
 
If you are interested in Mold design (3D) ,electrodes and core cavity splits this is the package.
 
It is very good.
 
It is a good package ,but Unigraphics is much better
 
Hello friends,

is there is any tutorials for pro/E mold design. I request you please mail to hmt34@yahoo.com

thank you

Harsha.T.
 
Status
Not open for further replies.

Similar threads

pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
2K
Designer_D
Designer_D
mattmyer
  • Locked
  • Question Question
Font Problems in Creo drawings
Replies
2
Views
2K
dgallup
dgallup
J
Pro-E Wildfire 4.0 Programming assistance needed !!
Replies
0
Views
3K
Joe Pie
J
samim09me
  • Locked
  • Question Question
Why this ProE Conflicts dialog box appears?
Replies
1
Views
400
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top