Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro Engineer Drawing Formats

Status
Not open for further replies.
ctarmijo

ctarmijo

Mechanical
Joined
Aug 28, 2003
Messages
2
Location
US
Does anyone know where I can download A-D size (ANSI format for standard manufacturing) formats for use in Pro/Engineer? I do not wish to create these basic formats myself due to project timeline considerations. Thanks in advance.

Christopher
 
Sort by date Sort by votes
I think a set comes with the standard Pro/E installation.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
 
Upvote 0 Downvote
Do you know if the basic installation files (which by the way are located in the loadpoint\format directory)conform to ANSI Y14.1 standard (I do not have that standard available for cross reference)? Thanks again!!!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
1K
Designer_D
Designer_D
pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
D
Lost Model in Drawing
Replies
0
Views
5K
Den E
D
freerangequark
  • Locked
  • Question Question
Drawing Color versus Background Color
Replies
0
Views
567
freerangequark
freerangequark
Picklefactory
  • Locked
  • Question Question
Creo drawing dimension arrows
Replies
2
Views
779
Picklefactory
Picklefactory

Part and Inventory Search

Sponsor

Back
Top