I am looking for advice on configuring my drawing setup to correct the drawing layout which is currently in first angle projection. It appear that the default projection type is set correctly to third angle but it is still creating the drawing views in a first angle projection layout. I have more SW experience than Pro/E and I seem to be missing something that will correct the problem. Any suggestions?
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pro/E first and third angle projection
- Thread starter bobgannon
- Start date
The drawing option is projection_type and the value you want is third_angle (this is the default).
Note that changing this setting is NOT retroactive. It will only affect the creation of new projection views.
If you already have a detailed drawing with first angle views, you can just move them to the other side.
----------------------------------------
The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
Note that changing this setting is NOT retroactive. It will only affect the creation of new projection views.
If you already have a detailed drawing with first angle views, you can just move them to the other side.
----------------------------------------
The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
- Thread starter
- #4
The problem seems to be that the projection_type is set correctly but the drawing is still defaulting to the wrong type, first angle. We are using a template so maybe that is the problem. Where do I change the option for the template and format level to create a new template/format? We are not sure how the projection type got changed. It was correct for a long time then we started having problems with the drawings. Are there any known issues that cause this?
I have never heard of any problems with this functionality.
Open your drawing template and change it like any other drawing. Remember, it is not retroactive so if the template views are not right you either need to move them or delete them and remake them.
----------------------------------------
The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
Open your drawing template and change it like any other drawing. Remember, it is not retroactive so if the template views are not right you either need to move them or delete them and remake them.
----------------------------------------
The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question