Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Plot yielded elements
- Thread starter geo2006
- Start date
Simfinite engineering
Bioengineer
Why yes there is!
press 'plot contours on deformed shape'
select PE to plot (plastic strain)
go to view cut, make a new one w isosurface, set limit > 0, done!
Alternatively: select LE to plot
go to view cut, make a new one w isosurface, set limit > 'your plastic strain limit', done!
I believe you need to have abaqus version > 6.10 for it though.
press 'plot contours on deformed shape'
select PE to plot (plastic strain)
go to view cut, make a new one w isosurface, set limit > 0, done!
Alternatively: select LE to plot
go to view cut, make a new one w isosurface, set limit > 'your plastic strain limit', done!
I believe you need to have abaqus version > 6.10 for it though.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question