Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pipe Leak Repair Clamp Design
- Thread starter DRS_02
- Start date
Check out ASME PCC-2 Repair of Pressure Equipment and Piping I believe part 2 covers welded repairs such as split sleeves, part 3 covers mechanical clamps, and part 4 covers non-metallic repairs i.e. epoxy wraps. When in doubt there are several organizations that provide piping enclosures. For each design they should also provide an engineering package that covers the equations and method of their designs. Most calculations will be per the required piping code.
- Status
Similar threads
- Locked
- Question
