Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pipe Leak Repair Clamp Design

Status
Not open for further replies.

DRS_02

Mechanical
Jun 23, 2017
4
IN
Can anyone suggest me the guidelines for pipeline leak repair clamp(split-sleeve type) design?
Looking for books which have detailed calculation method of these types of clamps.
Thank you!!
 
Replies continue below

Recommended for you

Check out ASME PCC-2 Repair of Pressure Equipment and Piping I believe part 2 covers welded repairs such as split sleeves, part 3 covers mechanical clamps, and part 4 covers non-metallic repairs i.e. epoxy wraps. When in doubt there are several organizations that provide piping enclosures. For each design they should also provide an engineering package that covers the equations and method of their designs. Most calculations will be per the required piping code.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top