Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PED

Status
Not open for further replies.
metalonis

metalonis

Mechanical
Joined
Feb 28, 2002
Messages
183
Location
US
Am I correct that valves (e.g. shutoff valves) should be classified as piping (rather than vessels) under the PED?
 
Sort by date Sort by votes
As far as I know yes (same as pump housings etc.).
 
Upvote 0 Downvote
I think it should be classified as an accessery
 
Upvote 0 Downvote
Piping. I have done many CE/PED Techfiles for Valves. Article 1 para. 2.1.2.

Petrotrim Services
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

xinloinhe
  • Locked
  • Question Question
PED subconstractor
Replies
4
Views
945
xinloinhe
xinloinhe
John Jones
  • Locked
  • Question Question
PED Design Pressure vs MAWP
Replies
1
Views
1K
XL83NL
XL83NL
ENG2194
  • Locked
  • Question Question
PED DOC liability
Replies
4
Views
516
XL83NL
XL83NL
ENG2194
  • Locked
  • Question Question
PED Annex I 4.3 Material
Replies
1
Views
361
XL83NL
XL83NL
chshbt
  • Locked
  • Question Question
European bolt material for ASME designed valve with PED Category IV
Replies
2
Views
521
chshbt
chshbt

Part and Inventory Search

Sponsor

Back
Top