Jun 10, 2008 #1 autombo Mechanical Joined Aug 17, 2006 Messages 2 Location US Why doesn't compress calculate the weight of pass partition(s)?
Jun 18, 2008 #2 TomBarsh Structural Joined Jun 20, 2002 Messages 1,003 Location CA "Why" became too philosophical for me a long time ago. But to me it sounds like a reasonable thing to ask to be calculated. Send your request to support "at" codeware.com. Or use the form at http://www.codeware.com/support/contact.html "Although this forum is monitored by Codeware it is not intended as a venue for technical support and should not be used as the primary means of technical support." Tom Barsh Codeware Technical Support http://www.codeware.com Upvote 0 Downvote
"Why" became too philosophical for me a long time ago. But to me it sounds like a reasonable thing to ask to be calculated. Send your request to support "at" codeware.com. Or use the form at http://www.codeware.com/support/contact.html "Although this forum is monitored by Codeware it is not intended as a venue for technical support and should not be used as the primary means of technical support." Tom Barsh Codeware Technical Support http://www.codeware.com