Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Weight value, W, used in equation tw = W/(2*pi*Rm*St*Ks*Ec) for cylind

Status
Not open for further replies.
SyedZainAli

SyedZainAli

Mechanical
Joined
May 28, 2011
Messages
27
Location
SA
I want to ask the Question that when ever we design vertical vessel on compress having support lugs this error occurs "Weight value, W, used in equation tw = W/(2*pi*Rm*St*Ks*Ec) for cylinder and transition components does not include weight of liquid above top of vessel.
kindly ellaborate the logic behind this error and to to avoid it?
 
Status
Not open for further replies.

Similar threads

Amr Shams
  • Locked
  • Question Question
Advisory Warning on CS-2 Vacuum Chart Temperature Limit- Allowable compressive stress
Replies
0
Views
2K
Amr Shams
Amr Shams
Amr Shams
  • Locked
  • Question Question
Assistance for Multi-Chamber Vessel Design in COMPRESS
Replies
2
Views
3K
amillsmuel
A
Amr Shams
  • Locked
  • Question Question
UW-21 minimum requirement for External weld for SO Flange
Replies
2
Views
921
Amr Shams
Amr Shams
withak36301
  • Locked
  • Question Question
Seismic Calculations in Compress Without Supports
Replies
2
Views
1K
withak36301
withak36301
chaulklate
  • Locked
  • Question Question
Code Case 2901-1
Replies
1
Views
1K
Cobra17
Cobra17

Part and Inventory Search

Sponsor

Back
Top