Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Partially shaded on assembly 3D - NX1946 1

Status
Not open for further replies.

Vyacad

Mechanical
Joined
Sep 10, 2014
Messages
14
Location
BR
Hi,
We recently migrated to NX1926 and the "partially shaded" feature is no longer working in this version when we have a set assembly in modeling.
Do I need to change some setting for it to work?

Thanks!
 
Newer versions of NX have a new load option, "minimally load", which is set as the new default. I don't know if this is the source of your issue, but I'd suggest changing the load option to "fully load"; or, if you have a large assembly, "partially load". If your assembly is already opened and loaded, you can right click on a component in the assembly navigator and use "load fully" (or "load exact", something to that effect) to fully load the component.

www.nxjournaling.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top