Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

On site precast plant

Status
Not open for further replies.

elpoblano

Structural
Joined
Sep 29, 2004
Messages
19
Location
CA
Could someone update me in the basic layout and requirements for on-site precast plants producing piles?

I have read Chaper 4 of ACI543R-00 "Design, Manufacture and installation of Concrete Piles", but it is not very clear on the basic requirements, other than certification.

Thank you,
 
Sneak off and go visit some operational ones! The layout would depend on a number of things near the forefront which would be the production rate that you require. For 10 piles/day, you layout would differ than if you had to produce 40 piles per day. Has to do with the precast beds.
 
Another factor would be the type project - for a bridge, the piles may be loaded on barges. For an industrial plant or building, on-site trucking is more likely.

[reading]
 
I assume the piles are prestressed, if so the anchorage foundations will be significant.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top