Oct 5, 2001 #1 LPPE Structural Joined May 16, 2001 Messages 578 Location US Where can I find section properties of old B sections? Was the B designation replaced by the WF designation (and then just W)? Is there an online database of old shapes?
Where can I find section properties of old B sections? Was the B designation replaced by the WF designation (and then just W)? Is there an online database of old shapes?
Oct 5, 2001 #2 Qshake Structural Joined Jul 12, 2000 Messages 2,672 Location US Here is a FAQ in this section which might provide a source of information: faq507-25. To my knowledge there are no online databases for old sections. Upvote 0 Downvote
Here is a FAQ in this section which might provide a source of information: faq507-25. To my knowledge there are no online databases for old sections.
Oct 5, 2001 #3 whymrg Structural Joined Jun 1, 2001 Messages 126 Location US Book "AISC Iron ans Steel Beams 1873 to 1952" is available for $30 + S&H from http://www.aisc.org I do not know any sites with this info. If you need one or two shapes e-mail me at MGinsburg@leoadaly.com Upvote 0 Downvote
Book "AISC Iron ans Steel Beams 1873 to 1952" is available for $30 + S&H from http://www.aisc.org I do not know any sites with this info. If you need one or two shapes e-mail me at MGinsburg@leoadaly.com
Oct 5, 2001 #4 blueprint Structural Joined May 14, 2001 Messages 29 Location AU Got to the Bethlehem Steel web site and check out their archive section. There is a good database with names and properties of old steel shapes etc. Peter. Upvote 0 Downvote
Got to the Bethlehem Steel web site and check out their archive section. There is a good database with names and properties of old steel shapes etc. Peter.