Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

% of Delta ferrite in P91 1

Status
Not open for further replies.
pandithan

pandithan

Mechanical
Joined
May 20, 2001
Messages
101
Location
IN
What is max % delta ferite allowed in P91
Pandithan
 
Sort by date Sort by votes
There is no set limit per specification; however, there should be no delta ferrite. EPRI recommends CNB < 10 to assure zero delta ferrite. You can download EPRI publication 1023199 for free.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
Measurement of gamma prime in superalloys.
Replies
2
Views
8K
absaul02
A
PRjuventus
  • Locked
  • Question Question
Interpreting of "thickness is the minimum dimension of the heaviest section"
Replies
0
Views
1K
PRjuventus
PRjuventus
mrfailure
  • Locked
  • Question Question
Delta Ferrite Measurement in Martensitic Stainless Steels
Replies
6
Views
959
Guest102023
Guest102023
A
  • Question Question
Heat treatment of 17-4PH separately cast specimens
Replies
13
Views
14K
mfgenggear
mfgenggear
RAJMETALLURGY
  • Question Question
Mechanical properties in heavy thick test coupons.....
Replies
4
Views
9K
SK METT
SK METT

Part and Inventory Search

Sponsor

Back
Top